[Heater & Lantern] Campingmoon T-1; Camping Gas Lantern with Wooden Lantern Case

• CAMPINGMOON camping gas lantern, uses isobutane gas as fuel (gas fuel not included).
• This gas lantern can be used on a screw-on style fitting isobutane gas fuel canister (EN417 Lindal Valve type gas canister).
• This camping gas lamp provides a gentle light that shimmers like a candle creates a good atmosphere. Light frame is adjustable.
• DIMENSIONS:φ2"x6.5"(H) / φ5x16.5(H)cm；WEIGHT:5.8oz / 163g (gas lantern only)
  A wooden case with built-in urethane foam inside is attached.
  If you find any initial defects, please contact us.

Cautions

Please use it in a safe outdoor location where ventilates well and there is no fire or anything causes fire.

Please use it in a safe outdoor location where ventilates well and there is no fire or anything causes fire.

CNC MACHINING CNC machining technology makes this gas lantern have a high quality.

HEAT RESISTANT GLOVE This camping gas lamp has a high-strength stainless steel frame and a heat-resistant glove with enhanced thinness.

WOODEN STORAGE CASE This camping gas lamp is convenient to carry with a wooden storage case. Built-in urethane foam inside the case can protect gas lamp's glass gloves.

Usage scene

How to adjust the amount of light Turning the control valve to adjust the height of the flame.

How to remove and install glove Wait for the lantern to cool down. When removing, hold the lantern by its base and the glove by its domed section and pull the glove gently. When installing, squeeze the two spring rods inwards and push the glove slowly.

Ignition method Hold a lighted match or lighter near the ignition opening. Turn the control valve counterclockwise. NOTE: If you could not light the lantern, please turn off control valve totally and turn it counterclockwise again.

For clogging of gas nozzle Due to impurities in the gas fuel, nozzle may get clogged. The gas nozzle can be cleaned when it gets dirty.